| Network Parameters |
|
| Ports |
8 × Gigabit PoE port, 2 × Gigabit RJ45 port |
| MAC Address Table |
4K |
| Switching Capacity |
20 Gbps |
| Packet Forwarding Rate |
14.88 Mpps |
| Internal Cache |
1.5 Mbits |
| PoE Power Supply |
|
| PoE Standard |
IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
| PoE Port |
PoE: Ports 1 to 8 |
| Max. Port Power |
30 W |
| PoE Power Budget |
60 W |
| Software Function |
|
| Long Range |
Ports 1 to 8: up to 300 m. |
|
Long range performance may vary depend on camera model or cable condition. |
| Port Isolation |
Ports 1 to 8: port isolation mode to improve network security |
|
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog |
Ports 1 to 8: auto detect and restart the cameras that do not respond. |
| Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. |
|
Support static link aggregation. |
|
Support 3 aggregation groups. |
| Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. |
|
Support 802.1D STP. |
|
Suppport 802.1w RSTP. |
| VLAN |
VLAN is used for network scale planning and network health improvement. |
|
Support 802.1Q. |
|
Configurable VLAN ID from 1-4094. |
|
Support Trunk, Access port mode. |
|
Support Max. 32 VLAN. |
| HPP |
Support one-click activation and remote management via Hik-Partner Pro. |
|
Functions supported: |
|
1. Display the port rate. |
|
2. Display the port bandwidth utilization rate. |
|
3. Display the PoE power usage. |
|
4. Display topology information. |
|
5. Display the alarm status. |
|
6. Restart ports and devices. |
|
7. Enable port long-rage mode. |
|
8. Remotely upgrade the device. |
| System Maintenance |
Support device management via web. |
|
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. |
|
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
|
Support management via Hik-Central Pro. |
|
Support remote management via Hik-Partner Pro. |
|
Support cable detection. Abnormal open circuits and short circuits as well as |
|
network cable length can be detected. |
|
Supports 802.1ab LLDP for peer device discovery. |
|
Support SNMP v1/v2c for third-party management platform access. |
|
Support port mirroring for fault locating. |
| General |
|
| Shell |
Metal material |
| Weight |
0.54 kg |
| Dimensions (W × H × D) |
217.6 mm × 27.6 mm × 108.5 mm |
| Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Humidity |
5% to 95% (no condensation) |
| Relative Humidity |
5% to 95% (no condensation) |
| Power Supply |
54 V DC, 1.2 A |
| Installation Mode |
Desk-Mounted,Wall-Mounted |
| Max. Power Consumption |
65 W |
| Power Consumption in Idle |
2.5 W |
| Surge Protection |
6 kV |
| Approval |
|
| EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry |
Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
Chưa có đánh giá nào.