Network Parameters |
Ports |
4 × Gigabit PoE port, 1 × Gigabit RJ45 port |
MAC Address Table |
2 K |
Switching Capacity |
10 Gbps |
Packet Forwarding Rate |
7.44 Mpps |
Internal Cache |
1 Mbits |
PoE Power Supply |
PoE Standard |
IEEE 802.3af, IEEE 802.3at |
PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
PoE Port |
PoE: Ports 1 to 4 |
Max. Port Power |
30 W |
PoE Power Budget |
45 W |
Software Function |
Long Range |
Ports 1 to 4: up to 300 m. |
Long range performance may vary depend on camera model or cable condition. |
Port Isolation |
Ports 1 to 4: port isolation mode to improve network security |
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
PoE Watchdog |
Ports 1 to 4: auto detect and restart the cameras that do not respond |
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. |
Support static link aggregation. |
Support 1 aggregation group. |
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. |
Support 802.1D STP. |
Suppport 802.1w RSTP. |
VLAN |
VLAN is used for network scale planning and network health improvement. |
Support 802.1Q. |
Configurable VLAN ID from 1-4094. |
Support Trunk, Access port mode. |
Support Max. 32 VLAN |
HPP |
Support one-click activation and remote management via Hik-Partner Pro. |
Functions supported: |
1. Display the port rate. |
2. Display the port bandwidth utilization rate. |
3. Display the PoE power usage. |
4. Display topology information. |
5. Display the alarm status. |
6. Restart ports and devices. |
7. Enable port long-rage mode. |
8. Remotely upgrade the device. |
System Maintenance |
Support device management via web. |
Support DHCP Client. Enabled by default for dynamic assignment of management |
IP addresses. |
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
Support management via Hik-Central Pro. |
Support remote management via Hik-Partner Pro. |
Support cable detection. Abnormal open circuits and short circuits as well as |
network cable length can be detected. |
Supports 802.1ab LLDP for peer device discovery. |
Support SNMP v1/v2c for third-party management platform access. |
Support port mirroring for fault locating. |
General |
Shell |
Metal material |
Weight |
0.26 kg |
Dimensions (W × H × D) |
121.1 mm × 27.6 mm × 83.1 mm |
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
Operating Humidity |
5% to 95% (no condensation) |
Relative Humidity |
5% to 95% (no condensation) |
Power Supply |
54 V DC, 0.92 A |
Installation Mode |
Desk-Mounted,Wall-Mounted |
Max. Power Consumption |
50 W |
Power Consumption in Idle |
1 W |
Surge Protection |
6 kV |
Approval |
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
Chemistry |
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
đánh giá nào
Chưa có đánh giá nào.